logo

Cleaning Instructions

07934235880
info@wrap-smith.co.uk

Spray Sealant

Spray Sealant is the perfect solution for preserving your vinyl wrap surfaces. The new and improved formula is designed to clean, maintain and protect your surface to ensure a perfect sheen. We ensure that Spray Sealant Technology will protect your vehicles finish from stains and contamination. Our all-new sealant formula repels dirt, debris and road film. Easily remove dust, water spots and fingerprints is seconds

DESCRYPTIONS

  • Shake well before use
  • Wash car and remove any dirty from the surfaces. Use our shampoo and the
    Shine Cleaner for best results.
  • Surface must be well cleaned and dry.
  • Spray a fine mist of sealant on a single panel of a vehicle and rinse immediately.
    Very little is needed, and no overlap is necessary.
  • Wipe off with a microfiber cloth.
  • For long-lasting durability, apply Matte Spray Sealant at least once per month.

NOTE

Do NOT apply sealant in direct sunlight or to a hot surface!


Shampoo

Shampoo works specifically to remove grime, build-up and
dirt through the use of premium super polymers that are suspended within
the confines of a consistent discharge of foaming bubbles. Our shampoo is
the perfect choice for your weekly maintenance wash.
The high level of foam makes this high-tech detailing shampoo perfect for
foam cannons and foam guns.

DESCRYPTIONS

  • Shake well before use.
  • 2.Apply 25 – 30 ml of shampoo into a bucket with 10 – 15 L of clean water
  • 3.We recommend using 2 buckets washing method with Grit Guards.
  • 4.Pre-rinse the vehicle with a strong stream of water to dislodge and remove
  • dirt and debris from surface.
  • 5.Using the wash mitt and begin to wash the vehicle from the top down, rinsing
  • the mitt frequently in clear water or rinse bucket.
  • Dry vehicle with Microfibre drying cloth or chamois.

NOTE

Wash the vehicle out of direct sunlight. Do NOT allow shampoo to dry on surface!